Scratch Proof Glass Shelf 4mm Toughened Tempered Glass

Scratch Proof Toughened Tempered Glass Compatible With Glass Shelf Assembly

Description of toughened tempered glass:

We temper glass right here in our horizontal continuous tempering furnace. That means we can craft the glass to your exact specifications. Drill holes, grind edges, and make all necessary customizations to make it the perfect fit for your project, whether it’s tempered glass meant to replace fireplace door or custom tempered glass shelves. Then we heat treat it in our unique tempering furnace and ship it to you.
If you’re not sure whether or not your project or item should involve tempered or another kind of glass, feel free to contact us and we’ll walk you through some of the ins and outs regarding applicability, pricing, availability, etc.

Advantages of toughened tempered glass​:

• Toughened glass is extremely tough and hard. These glasses reduce the risk of injury and damage in care of disaster or calamity
• Fabulous variations of toughened glass provide a very rich and elegant look to the appliances
• It combines gloss appearance and good light transmission while providing a decorative effect.
• Toughened glasses are UR resistant, prevent heat absorption and are highly energy efficient

Application of toughened tempered glass:

Because the toughened tempered glass has the unique gloss appearance and good light transmission. it's widely used for oven door, oven control panel, microwave oven door glass, fridge glass door, fridge/ refrigerator/ freezer shelf, dish-washing machine panel, washing machine lid, dishwasher door, stove panel, switch panel glass,electronic products panel, wine cabinet door, Kitchen electronic scale, electronic weighing scale, switch panel, etc

Quality Inspection Item

2, Printing appearance: the glass printing area (ink covered area) of the control panel is judged under the condition that the back has opaque cover (black background), and under the black background, it is acceptable that the front is invisible.
3, Evenness: bow shape ≤ 0.5%; there is one place (one peak and one trough) allowed for every 610mm of waveform;
4, Granularity test: two pieces of tempered glass are selected for each batch of glass to be tested, and the place where the center of the long side of the glass plate is 13mm higher than the bottom edge is taken as the breaking point (see figure). After the glass is broken, the two areas with the largest granularity are selected in a 50mm*50mm box for counting. The number of crack-free particles completely contained in the 50mm*50mm box must be ≥50, and the largest particle size must be ≤ 15 mm * 8 mm.
5, Impact test: drop a steel ball with a diameter of 51mm and a weight of 535g from the glass surface 648mm, and impact the center of the glass plate once to ensure that the glass does not break.

FAQ

Q: What's the cut hole effect?
A: It depends on different thickness and for thick glass; we usually use water jet + CNC.

For thin glass, we use CNC for cut hole to make sure no breakage chips exist from hole edge.

Q: Is irregular shape glass available?
A: No problem because we will use shape cutting machine + CNC to make sure about the quality.

Q: How's the silk print effect?
A: Feihong received lots of praise in silk print quality base on import paints + auto silk print machine + dust free room.
Available in high temperature silk print(The paint melt into glass) and low temperature paint(Pass adhesion test).

Q: What's the edge treatment could meet?
A: We could make direct cut(cut chips, cheapest), fine grinded(CNC) and polish edges base on your need.
The chamfer / radius could be set.